MTX RE-Q5 5-Channel

signal processor restores bass when adding amps to a factory system * front , rear, and mono subwoofer preamp outputs * variable low-pass (40-200 Hz) and subsonic (10-40 Hz) filters * Bass Enhance switch * auxiliary input module with 16-1/2″ cable * processor dimensions: 10-1/2″W x 1-1/2″H x 4-1/2″D *
.
.
Read the rest of this entry »

Technical Details

* signal processor restores bass when adding amps to a factory system
* right, left, and subwoofer preamp outputs
* low-pass and subsonic filters
* Bass Enhance switch
* 8-1/8″W x 1-1/16″H x 3-3/4″D
.

Read the rest of this entry »

MTX Terminator TN250/1

* mono subwoofer car amplifier
* 100 watts RMS x 1 at 4 ohms (200 watts RMS x 1 at 2 ohms)
* low-pass filter (85 Hz, 18 dB per octave)
* bass boost (0, 6 or 12dB at 40 Hz)
.
.

Read the rest of this entry »

MTX Terminator

* 2-channel car amplifier
* 45 watts RMS x 2 at 4 ohms (75 watts RMS x 2 at 2 ohms)
* 150 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
* selectable full, high- and low-pass filters (85 Hz, 18 dB per octave)
.
.

Read the rest of this entry »

MTX Thunder

This is a MTX Audio RTP251D, Class D mono block car amp, which retails for $229.99 plus sales tax. It features MTX Audios adaptive Class D technology for large power numbers from a very small amp. This mono block amplifier delivers 600 watts of pure, clean power! It features an 18dB low pass crossover for maximum system flexibility and a MTX Thunder EQ selectable bass boost (0, 6, 12dB) centered @ 40Hz to enhance the low frequency. Not only does it have “Smart Engage” auto-turn-on
Read the rest of this entry »

MTX Terminator

* 4-channel car amplifier
* 45 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms)
* 150 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
* selectable full, high- and low-pass filters (85 Hz, 18 dB per octave)
.
.
.
Read the rest of this entry »

MTX JackHammer

* 4-channel car amplifier
* 50 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
* 200 watts RMS x 2 bridged (4-ohm stable in bridged mode)
* frequency response: 20-200 Hz
* variable high-pass filter (40-8000 Hz, 12 dB/octave)
.
Read the rest of this entry »

MTX JackHammer JH805

* 5-channel car amplifier
* 37.5 watts RMS x 4 at 4 ohms + 250 watts RMS x 1 at 4 ohms
* 75 watts RMS x 4 at 2 ohms + 500 watts RMS x 1 at 2 ohms
* 150 watts RMS x 2 bridged at 4 ohms + 250 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
* frequency response: 20-200 Hz
Read the rest of this entry »

MTX Thunder7402

* 2-channel car amplifier
* 100 watts RMS x 2 at 4 ohms (200 watts RMS x 2 at 2 ohms)
* MTX Prizm EFX selectable color display
* variable high- and low-pass filters (40-350 Hz)
* speaker-level inputs with Smart Engage
.
Read the rest of this entry »

MTX THUNDER-342

The crossover on this 2-channel amplifier is 12dB/octave high pass, 24dB/octave low pass, variable from 40Hz to 200Hz. In low pass mode, the outputs are mono at 24dB/octave. It’s highly flexible with varying slopes on the low and high pass to provide improved “bass up front”.
.
.
Read the rest of this entry »