Features:

Our new entery level slot vented enclosure was made to do one thing HIT LOW BASS. If low and loud is what you are trying to achieve and are on a tight budget then this enclosure will cure all your needs. We construct all of our enclosures from 3/4″ material to ensure the best construction for your dollar. Don’t be fooled by those 5/8″ knock offs built only god knows where. With this R/T enclosure you are getting a hand crafted built in the U.S.A enclosure that will last beyond a week after putting it in your trunk.

Price : $159.99

Features:

This box pounds hard. Like the dual version this box boasts aluminum side panels MDF construction silver terminal connectors and enough performance to make you smile! Rock on….

Price : $149.99

Features:

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and AMPLIFIED.Amplified ThunderForm models feature a proprietary woofer design thatincludes a long excursion voice coil and presents a very low ohm load to theamplifier. This design takes full advantage of the efficiency of Class Damplifier design while delivering powerful low frequency extension. Add all ofthese features up along with over voltage over current and voice coil shortprotection and you have a unit that looks and operates like it came as anoriginal part of the vehicle. The included wiring kit contains a 20′ powerharness gold plated power and ground ring terminals and a custom-tooled MTXAudio fuse holder.Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosure and amplifierCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderAmplifier Features:Powered by a sp NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

]]> http://modocars.com/mtx-thunderform-jwtj97g20a-t45-subwoofer/feed/ http://modocars.com/subzone-z-series-zv210-7548-10-inch-subwoofer/ http://modocars.com/subzone-z-series-zv210-7548-10-inch-subwoofer/#comments Thu, 25 Dec 2008 12:28:00 +0000 modocars http://modocars.com/subzone-z-series-zv210-7548-10-inch-subwoofer/

Specifications:Rectangular Vented enclosure designed for powerful bass with virtually noport noiseGray automotive-grade carpetingSupplied Baffle Panel is finished in textured black and allows the wooferto be recessed for a true custom look (optional custom color baffle panels areavailable separately from SubZone)Seriously-Strong…

Specifications:Rectangular Vented enclosure designed for powerful bass with virtually noport noiseGray automotive-grade carpetingSupplied Baffle Panel is finished in textured black and allows the wooferto be recessed for a true custom look (optional custom color baffle panels areavailable separately from SubZone)Seriously-Strong Ultra-thick 1-1/2″ MDF (Medium Density Fiberboard) frontpanelBuilt with Premium 3/4″ MDF (Medium Density Fiberboard) on sides andcenterIncludes Terminal Cups with Gold Plated multi-way Binding PostsEnclosure is tuned to 48 HzCutouts: 9-1/8″ x 2 (for 2 10″ subs)Internal Volume: 1.5 cubic feet (0.75 cubic foot per chamber/sub)Dimensions: 14″ H x 13-1/4″ D x 30-3/4″ W

]]>

CHEVROLET EXTRA CAB 1999-2004 ThunderForm (dual woofer model). Located under rear seat on driver side. Bolts to floor of vehicle. Molded in factory color Gray.Installation hardware supplied.

Price : $599.95

Bolts to floor of vehicle. Molded in factory color Blue. Installation hardware supplied.

Price : $599.95

Features:

Price : $69.99

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and AMPLIFIED.Amplified ThunderForm models feature a proprietary woofer design thatincludes a long excursion voice coil and presents a very low ohm load to theamplifier. This design takes full advantage of the efficiency of Class Damplifier design while delivering powerful low frequency extension. Add all ofthese features up along with over voltage over current and voice coil shortprotection and you have a unit that looks and operates like it came as anoriginal part of the vehicle. The included wiring kit contains a 20′ powerharness gold plated power and ground ring terminals and a custom-tooled MTXAudio fuse holder.Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosure and amplifierCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderAmplifier Features:Powered by a sp NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

CHEVROLET S-10 1995-2003 ThunderForm S1010G. Located behind the seat of regular cab pickups. Molded in factory color Gray.

Price : $499.95

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and NON-AMPLIFIED (can use your ownamplifier).Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosureCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderDetails:Enclosure loaded with 1 MTX Audio Thunder4500 10″ Subwoofer(pre-installed)Power Handling: 225 Watts RMSImpedance: 4OhmsCustom-fit molded textured loaded subwoofer enclosure - designed fora perfect fit in your vehicleConstructed of molded high-density polyethylene resin which dampensresonance (cabinet “ping”) and is rigid enough to resist flexingEngineered to deliver high SPL with very low distortionGold-plated binding postsIncludes all hardware for mounting thewoofer and the enclosureColor-matched Color to match interior: CHARCOALEnclosure Type: Sealed (acoustic suspension)Mounting Location: Fits in NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and AMPLIFIED.Amplified ThunderForm models feature a proprietary woofer design thatincludes a long excursion voice coil and presents a very low ohm load to theamplifier. This design takes full advantage of the efficiency of Class Damplifier design while delivering powerful low frequency extension. Add all ofthese features up along with over voltage over current and voice coil shortprotection and you have a unit that looks and operates like it came as anoriginal part of the vehicle. The included wiring kit contains a 20′ powerharness gold plated power and ground ring terminals and a custom-tooled MTXAudio fuse holder.Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosure and amplifierCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderAmplifier Features:Powered by a sp NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

CHEVY EXTRA CAB 1988-2004 ThunderForm (single woofer model). Located under rear seat on driver side. Bolts to floor of vehicle. Molded in factory color Maroon. Installation hardware supllied.

Price : $299.95

FORD F-150 REGULAR CAB 1997-2003 ThunderForm FRP20G. Location behind seat. Molded in factory colors Blue. All installation hardware included.

Price : $399.95

Loaded with single 10″ Thunder 4500 High Performance woofer Tan For 1995-2003 Chevy S-10 Regular Cab GMC Sonoma and Isuzu Hombre

Price : $299.95

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from your specific vehicle’s acoustic space. This vehicle-specific unloaded custom enclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and NON-AMPLIFIED (can use your ownamplifier).Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosure Details:Enclosure loaded with 2 MTX Audio Thunder4500 12″ Subwoofers(pre-installed)Power Handling: 450 Watts RMSImpedance: 4Ohms (internally wired in parallel to provide a single 4 Ohminput)Custom-fit molded textured loaded subwoofer enclosure - designed fora perfect fit in your vehicleConstructed of molded high-density polyethylene resin which dampensresonance (cabinet “ping”) and is rigid enough to resist flexingEngineered to deliver high SPL with very low distortionGold-plated binding postsIncludes all hardware for mounting thewoofer and the enclosureColor-matched Color to match interior: BLACKEnclosure T NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosureCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderDetails:Enclosure loaded with 2 MTX Audio Thunder4500 10″ Subwoofers(pre-installed)Power Handling: 450 Watts RMSImpedance: 4Ohms (internally wired in parallel to provide a single 4 Ohminput)Custom-fit molded textured loaded subwoofer enclosure - designed fora perfect fit in your vehicleConstructed of molded high-density polyethylene resin which dampensresonance (cabinet “ping”) and is rigid enough to resist flexingEngineered to deliver high SPL with very low distortionGold-plated binding postsIncludes all hardware for mounting thewoofer and the enclosureColor-matched Color to match interior: CHARCOALEnclosure Type: Sealed (acoustic suspension)Enclosure Volume: 1.46 Cubic feetDimensions: 15-3/4″H x 52-3/4″W x 9″DMounting Location: Fits behind seat. Jack and tools relocate to spotin center of enclosure in molded cut-out and are easily accessible.This item is also available in UNLOADED and AMPLIFIED models. See chartbelow:ColorUnloadedLoadedAmplified &LoadedTanF250R00T20UF250R00T20-T45F250R00T20A-T45CharcoalF250R00C20UF250R00C20-T45F250R00C20A-T45GreyF250R00G20UF250R00G20-T45F250R00G20A-T45BlackF250R00BK20UF250R00BK20-T45F250R00BK20A-T45Applications: 2000-2006 FORD F-250 SUPER DUTY REGULAR CAB PICKUPTRUCKS2000-2006 FORD F-350 REGULAR CAB NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and NON-AMPLIFIED (can use your ownamplifier).Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosureCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderDetails:Enclosure loaded with 2 MTX Audio Thunder4500 10″ Subwoofers(pre-installed)Power Handling: 450 Watts RMSImpedance: 4Ohms (internally wired in parallel to provide a single 4 Ohminput)Custom-fit molded textured loaded subwoofer enclosure - designed fora perfect fit in your vehicle Ty NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

Features:

two sealed enclosures for matched 10″ shallow-mount subs * 1/2″ MDF (medium density fiberboard) with gray carpet covering * dimensions: 22-1/4″W x 15-3/4″H x 4-3/4″D1 x 6-1/2″D2 *

Price : $99.99

Loaded with dual 10″ Thunder 4500 High Performance woofers Tan For 1999-2004 Chevy Extra Cab and Ext Cab Chevrolet GMC Pickups and 3-door models

Price : $399.95

CHEVY EXTRA CAB 1988-2004 ThunderForm (single woofer model). Located under rear seat on driver side.

Price : $499.95

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and NON-AMPLIFIED (can use your ownamplifier).Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosureCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spider Constructed of molded high-density polyethylene resin which dampensresonance (cabinet “ping”) and is rigid enough to resist flexingEngineered to deliver high SPL with very low distortionGold-plated binding postsIncludes all hardware for mounting thewoofer and the enclosureColor-matched Color to match interior: CHARCOALEnclosur NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

Loaded with single Thunder 4500 High Performance 10″ woofer Charcoal For 1988-2004 Chevy Extra Cab and Ext Cab Chevrolet GMC Pickups and 3-door models

Price : $299.95

CHEVROLET EXTRA CAB 1999-2004 ThunderForm (dual woofer model). Located under rear seat on driver side.

Price : $599.95

Features:

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wastedspace in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This design takes full advantage of the efficiency of Class Damplifier design while delivering powerful low frequency extension. Add all ofthese features up along with over voltage over current and voice coil shortprotection and you have a unit that looks and operates like it came as anoriginal part of the vehicle. The included wiring kit contains a 20′ powerharness gold plated power and ground ring terminals and a custom-tooled MTXAudio fuse holder.Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosure and amplifierCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderAmplifier Features:Powered by a sp NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.

With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space. This vehicle-specific unloaded customenclosure will allow you to achieve a professional-looking installation whilemaintaining a stock OEM look and keeping your valuable car stereo gear out ofsight from would-be thieves.This MTX Audio ThunderForm is LOADED and NON-AMPLIFIED (can use your ownamplifier).Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosureCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderDetails:Enclosure loaded with 2 MTX Audio Thunder4500 10″ Subwoofers(pre-installed)Power Handling: 450 Watts RMS Impedance: 4Ohms (internally wired in parallel to provide a single 4 Ohminput)Custom-fit molded textured loaded subwoofer enclosure - designed fora perfect fit in your vehicleConstructed of molded high-density polyethylene resin which dampensresonance (cabinet “ping”) and is rigid enough to resist flexingEngineered to deliver high SPL with very low distortionGold-plated binding posts

MTX Audio ThunderForms (loaded with subs) and Bass Slammers (empty/unloaded) are the best way to utilize wasted space in your vehicle. With this Bass Slammer you can save the cargo space foryour cargo not a bulky heavy subwoofer box. This Bass Slammer is anacoustically-designed non-resonant airtight enclosure with the correctinternal volume to yield optimum bass response and performance from yourspecific vehicle’s acoustic space.  This MTX Audio ThunderForm is LOADED and AMPLIFIED.Amplified ThunderForm models feature a proprietary woofer design thatincludes a long excursion voice coil and presents a very low ohm load to theamplifier. This design takes full advantage of the efficiency of Class Damplifier design while delivering powerful low frequency extension. Add all ofthese features up along with over voltage over current and voice coil shortprotection and you have a unit that looks and operates like it came as anoriginal part of the vehicle. The included wiring kit contains a 20′ powerharness gold plated power and ground ring terminals and a custom-tooled MTXAudio fuse holder.Subwoofer Features:Premium-quality MTX Audio Thunder4500 Series Subwoofer modified especiallyfor this enclosure and amplifierCarbon-filled Polypropylene Cone and polyether foam surround - addsstrength and resistance to heat. Cone is also very resistant to environmentalextremesAsymmetrical Linear Drive System (ALDS) which allows for high output andlow distortionSpider Plateau Venting which vents heat from the voice coil throughmetal-mesh covered vents that surround the back of the spiderAmplifier Features:Powered by a sp NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com’s description field.